How to clean Oculus lenses quickly and safely

If you own a Oculus Quest 2, chances are you’ve been wondering how to clean Oculus lenses. It seems that no matter how careful you are, the lenses of the best VR headset will inevitably find himself marked with fingerprints and smudges after playing some of the best Oculus Quest 2 games. At this point, something has to be done, because the whole experience is marred by blurry vision.

Don’t panic. Here, we’ll walk you through the cleaning process, from the items you need to the best methods. Cleaning Oculus lenses really couldn’t be easier and it takes seconds, so there’s no reason not to. Here’s how to clean Oculus lenses.

How to Clean Oculus Lenses

what you will need

Microfiber cloth for optical lenses

Whether you have an Oculus Rift headset or a Quest, this method works for both sets of lenses.

Oculus (or Meta) states that the best method for cleaning lenses is to use a dry microfiber optical lens cloth. That’s it, you don’t use liquids or chemical cleaners as this could damage the helmet and void your warranty. If you don’t have a microfiber cloth, we recommend the Edison & King Extra Large Microfiber Cleaning Cloth ($9.99, Amazon).

The lenses of an Oculus Quest 2 cleaned with a microfiber cloth

(Image credit: future)

Start at the center of the lens and gently wipe in an outward circular motion. Then use a new section of fabric for the second lens. That’s all we can say about it.

How to clean up the rest

While you’re at it, why not take a look at the whole headset? Again, this is relatively easy to do and will help maintain your Oculus.

You should use a dry microfiber cloth to wipe down the exterior of your headset. Make sure you have a good grip and don’t apply any pressure, especially around the sensors if you have a Quest 2. If you need microfiber cleaning cloths, MR.SIGA Microfiber Cleaning Cloths are a good option ($11.99). , Amazon).

The Oculus Quest 2 headset being cleaned with a microfiber cloth

(Image credit: future)

To clean the straps and foam, you can use non-abrasive antibacterial wipes to disinfect. Just be sure not to use alcohol or abrasive cleaning chemicals, as this could again lead to damage.

If the top strap is visibly discolored on your Oculus Quest 2, either from grease or hair dye, you can give it a deep clean. First, completely remove the headband by releasing the velcro on the top strap, then sliding it freely from one of the detached sides. Then wash your headband in cold soapy water and rinse it before letting it air dry for 24 hours. Don’t put it in the dryer. Then when dry, reattach.

For controllers, the technique is very similar to straps and foam — you can use a dry microfiber cloth or non-abrasive antibacterial wipes. Again, no alcohol or harsh chemical cleaners. Be sure to clean all controllers, including around the back where you type and between the buttons. It’s also worth investing in one of the best Oculus Quest 2 cases to keep them smudge-free when not in use.


More information about How to clean Oculus lenses quickly and safely

If you own an Oculus Quest 2, odds are you’ve wondered how to clean Oculus lenses. It seems no matter how careful you are, the lenses of the best VR headset will inevitably end up marked with fingerprints and smudges after playing some of the best Oculus Quest 2 games. At that point, something needs to be done, because the whole experience is ruined by blurry vision. 
Don’t panic. Here, we will guide you through the cleaning process, from the items you need to the best methods. Cleaning Oculus lenses really couldn’t be easier and it takes seconds to do, so there’s no reason not to do it. Here’s how to clean Oculus lenses.  
How to clean Oculus lenses 
What you will need
Optical lens microfiber cloth
Whether you own an Oculus Rift headset or a Quest, this method works for both sets of lenses.
Oculus (or Meta) states that the best method to clean the lenses involves using a dry optical lens microfiber cloth. That’s it, you don’t use liquids or any chemical cleaners as this can damage the headset and invalidate your warranty. If you don’t have a microfiber cloth, then we recommend the Edison & King Extra Large Microfiber Cleaning Cloth ($9.99, Amazon). 

(Image credit: Future)
Start from the center of the lens and gently wipe in a circular motion towards the outside. Then use a fresh section of the cloth for the second lens. That’s all there is to it.  
How to clean the rest 
While you’re at it, why not give the whole headset a onceover? Again, this is relatively easy to do and will help maintain your Oculus.
You should use a dry microfiber cloth to wipe the outside of your headset. Make sure you have a good grip as you do this, and don’t apply any pressure, especially around the sensors if you have a Quest 2. If you need microfiber cleaning cloths, MR.SIGA Microfiber Cleaning Cloths are a good option ($11.99, Amazon). 

(Image credit: Future)
To clean the straps and the foam, you can use non-abrasive anti-bacterial wipes to sanitize. Just be sure not to use alcohol or any abrasive cleaning chemicals as this again can lead to damage. 
If the top strap is visibly discolored on your Oculus Quest 2, be it from grease or hair dye, you can give it a deeper clean. First, remove the headstrap completely by releasing the velcro on the top strap, and then by sliding it free from one of the detatched sides. Then wash your headstrap in cold soapy water and rinse, before leaving out to air dry for 24 hours. Do not put it in the dryer. Then once dry, reattach.
For the controllers, the technique is very similar to the straps and foam — you can use a dry microfiber cloth or non-abrasive anti-bacterial wipes. Again, no alcohol or abrasive chemical cleaners. Be sure to clean all over the controllers, including round the back where you grip and in between the buttons. It’s also worth investing in one of the best Oculus Quest 2 cases to keep them smudge-free when you’re not using them.

#clean #Oculus #lenses #quickly #safely


Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Back to top button